WEE Technology Company Limited - WEE are Capacitors Specialist

WEET Aluminum Electrolytic Capacitors are good alternatives for CDE, KEMET, Panasonic, Rubycon, United Chemi-Con (or Nippon Chemi-Con), Nichicon...

There is a wide selection of standard and custom screw, lug, snap-in terminal and board mount smd capacitors.

Cross CD135:
WEET WED CD135 2000H at 85C Miniaturized Screw Aluminum Electrolytic Capacitors
Datasheet: https://www.weetcapacitor.com/Datasheet/WEET-WED-CD135-2000H-at-85C-Miniaturized-Screw-Aluminum-Electrolytic-Capacitors.pdf 

Cross CD136:
WEET WEF CD136 2000H at 105C High Ripple Current Screw Aluminum Electrolytic Capacitors
Datasheet: https://www.weetcapacitor.com/Datasheet/WEET-WEF-CD136-2000H-at-105C-High-Ripple-Current-Screw-Aluminum-Electrolytic-Capacitors.pdf 

Comparison of non-solid and solid types:
Aluminum electrolytic capacitors are divided into two sub-types depending on whether they make use of liquid or solid electrolyte systems.

Aluminum electrolytic capacitors with non-solid electrolyte:
may use a liquid electrolyte based on ethylene glycol and boric acid, so-called "borax" electrolytes, or based on organic solvents, such as DMF, DMA, GBL, or based on high water containing solvents, for so-called "low impedance", "low ESR" or "high ripple current" capacitors.
Aluminum electrolytic capacitors with solid electrolyte:
have a solid manganese dioxide electrolyte, it's solid aluminum capacitor (SAL), or a solid polymer electrolyte, it's polymer aluminum electrolytic capacitor, or hybrid electrolytes, with both a solid polymer and a liquid, it's also polymer aluminum electrolytic capacitor.