WEE Technology Company Limited - WEE are Capacitors Specialist

WEET Suggestion for using resistors:

It is recommended to leave a power margin of 1.5 times when using resistors in the circuit. For example, if the voltage in the circuit is 100V, the current is 0.01A, and the calculated power is P=100 * 0.01=1W, then the resistor cannot be used as 1W. If there is no 1.5W resistor, a 2W resistor needs to be used.

Advantages of cement resistance:

1. Features such as shock resistance, moisture resistance, heat resistance, good heat dissipation, and low price.

2. Fully insulated, suitable for printed circuit boards.

3. Wire winding on the porcelain rod and then welding the joints to produce accurate resistance values and extend service life.

4. High resistance values are made using metal oxide film (MO) instead of wire winding.

5. Excellent heat resistance, low resistance temperature coefficient, and linear variation.

6. Short term overload resistance, low noise, resistance value unchanged over the years.

7. Good explosion-proof performance, providing protection.