CBB61 box shape and plastics case motor running capacitor is a widely used electronic component. It used in AC motor, ceiling fans, water pumps, washing machines, etc. But if you want to replace the CBB61 capacitor, will you wire it? If not, WEET will tell you the detailed wiring steps for CBB61 capacitor:

1. Determine polarity: In some special cases (such as capacitors with markings), be sure to connect them correctly according to the markings.

2. Peel off the outer layer of the wire: Use a wire stripper to peel off the outer layer of the wire that needs to be connected to the capacitor for an appropriate length, usually about 5-10 millimeters.

3. Bending the wire: In order to facilitate insertion into the capacitor pin hole and fixation, the end of the wire can be slightly bent into a small hook shape.

4. Insertion into Pin Holes: Insert the stripped wires into the two pin holes of the capacitor. Ensure that the wires are in close contact with the pins to avoid looseness.

5. Fixing wires: Please be careful not to apply excessive force to avoid damaging capacitors or wires.

6. Insulation treatment: For safety reasons, a layer of insulation tape can be wrapped around the connection to prevent the risk of short circuit or electric shock.

7. Check the connection: Carefully check whether each connection point is firm and reliable.

WEET has strong capabilities, a strong technical research and development team, and advanced production equipment to provide you with high-quality products and services. We also have a comprehensive after-sales service system that can timely solve customer problems and needs, ensuring customer satisfaction. What are you waiting for? Click on the link now to learn about us!

Click on the link in a new window ：Fan Capacitor CBB61 Cable Series