WEET The Adjustment Method of 3266 Trimming Potentiometer 5 Terminal Styles
WEE Technology Company Limited - Manufacturer For Full Range of Resistors
Usually, the terminal pins of a 3266 potentiometer consist of three pin contacts, one movable pin and two fixed pins.
However, during installation and wiring, the two fixed pins can be interchanged, while the middle fixed pin cannot be interchanged with the movable pin,
otherwise it will cause incompatibility between the wires and may directly damage the potentiometer.
The adjustment method of 3266 potentiometer can be achieved by inserting a flat screwdriver into the screw adjustment port,
and then turning the screwdriver can change the orientation of the chip, thereby controlling the adjustment of resistance value
Standard Resistance Range | 10Ω - 5MΩ |
Resistance Tolerance | ±10%; ±20% for 10, 20 and 2M ohm |
Absolute Minimum Resistance | ≤10Ω(100Ω≤R≤1KΩ) ≤1%R(R>1KΩ) |
Contact Resistance Variation | CRV≤3% or 5Ω (whichever is larger) |
Insulation Resistance | R1≥1GΩ(500Vdc) |
Withstand Voltage | 500VAC |
Effective Travel | 10±2 turns nom |
https://www.resistorsfactory.com/Datasheet/WEET-WTP-3266-0.25W-6mm-Square-Trimming-Potentiometer.pdf