WEE Technology Company Limited - WEE are Capacitors Specialist

Differences between Aluminum Foil and Film Metallized Polypropylene Capacitors (two kinds of materials)and Single Metallized Film Capacitors (single layer material)? WEET WMH Aluminum Foil and Film Metallized Polypropylene Capacitors is a good example to compare with WEET WMF, WME series.

We call "Aluminum Foil and Film Metallized Polypropylene Capacitors "as Film/Foil Capacitors for short in below reference.

Size Difference, Film/Foil Capacitors are larger than Single Metallized Film Capacitors. 

Film/Foil capacitors consist of two plates of aluminum foil, which act as the electrodes, separated by a Metallized Film, which used as the dielectric. These materials are non-inductively wound to form the capacitor section. The wire leads are welded directly to the aluminum foil which extends out on both sides of the capacitor section, hence the term extended foil design 

In order to provide the utmost in dependability a sufficient thickness of dielectric film is essential. This construction criteria is the primary reason why the physical dimensions of Film/Foil capacitors are larger than that of the single metallized types.

In contrast to the Film/Foil capacitor, where the electrode is an independent layer of aluminum foil, the electrode for the metallized film capacitor is an extremely thin layer of metal which is vacuum-deposited directly onto the dielectric film. The wire lead is connected to the electrodes by means of a metal spray applied to each end of the capacitor section; the lead wire is welded to this metal end spray 

Metallized film capacitors are manufactured using a thinner dielectric film than that which is used in the same rated Film/Foil design.

This is possible due to the self-healing characteristics of the metallized film. Self-healing, or clearing, removes a fault or short circuit in the dielectric film by vaporizing the metal electrode surrounding the defect and isolating the area.

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WMG 0.068uF 630V Foil and Film Polypropylene Capacitors Compared with Polyester Capacitors

WEE Technology Company Limited - WEE are Capacitors Specialist

Advantages and Benefits of WMG Aluminum Foil and Film Capacitors versus Metallized Polypropylene Film Capacitors MKP

Several advantages the Film/Foil capacitor design offers over metallized are a higher insulation resistance, better capacitance stability, high current carrying capabilities for pulse applications (high dV/dt capability) and a lower dissipation factor. The excellent heat dissipation of the Film/Foil design is a result of the metal foil electrodes acting as heat sinks, which draw heat out from the interior of the unit. This superior heat dissipation allows for a higher voltage application, in comparison to the metallized, at the same frequency. The extended foil design also allows for operation at higher peak currents and faster duty cycles. Therefore you obtain the benefits of an extended foil design plus the self-healing characteristics of the metallized.

WEE Technology Company Limited - WEE are Capacitors Specialist    

WEET WME 6.8uF 630VDC Metallized Polypropylene Film Capacitors MKP Axial Music Capacitors Applications in Audio Equipments:

These capacitors are suitable for a wide range of applications in audio amplifiers, circuits for audio speakers, speaker crossovers, audio systems for car, record players, CD players, and musical instruments such as bass guitars.

They are also called as Tinned Copper Precision Bypass Capacitors, or MKP AUDIOPHILER Metalized Polypropylene Coupling Crossover Axial Capacitors

Choose WEET's 6.8 µF  630VDC  capacitor for pure signal filtering as a bypass capacitor for speakers or for use in replacing capacitors in the signal path of existing high-end passive crossovers.

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET provide a dramatic improvement in clarity, focus and dynamics when used in critical new designs, as an upgrade to existing tube or solid-state components, or in musical instruments.WEET WME Audio Capacitors is suitable for most audio applications.

WEET WME Metallized Polypropylene Film Capacitors MKP MPT PP Axial Audio Capacitors Features: 

Quick transient design
High Precise Capacitance ±3%, ±5%
Very Low Dielectric absorption factor
Very Low Dissipation factor
Very Low ESR
Very Low Inductance
Excellent handling of high current audio pulses

WEE Technology Company Limited - WEE are Capacitors Specialist        

European users of the WEET WME Premium Music Capacitors regard them as spatially remarkable, great for imaging, and naturally balanced. Extract the best possible performance from your speakers' drivers, and hear everything on high resolution recordings. 
WEET WME Premium Music Capacitors are also great for upgrading capacitors in the signal path of existing high-end passive crossovers.

 WEET WME Premium Music Capacitors Specifications:

• Value: 3.3 µF
• Rated: 400 VDC
• Tolerance: ±5% (J)
• Dissipation Factor: Max 0.001 (0.1%) @ 1 KHz
• Operating Range: -55°C to 85°C
• Dielectric Strength: 150%
• Insulation Resistance: 10,000 MΩ x µF
• Life Test: 1,000 hours @ 85°C, 150% rated voltage
• Dimensions: 20.5 mm Dia. x 31.5 mm L. Max
• Leads Diameter: 0.8mm Tinned Copper Wire

WEE Technology Company Limited - WEE are Capacitors Specialist  

WEET WME Premium Capacitors are constructed of a specially wound metallized polypropylene to minimize inner vibration, which keeps microphonic effects as low as possible. 
High purity copper leads, and flame-retardant tape wrap
Specially designed for crossovers and electronics
Extra-thick tinned copper leads
250 VDC, high current capacity Capacitors

Cross Reference to : Jantzen Audio, Dayton Audio, Solen Polypropylene Capacitor

Specifications: • Rated: 250 VDC • Tolerance: 5% • Value: 2.2uF

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WMG Axial Superior  and Film Met. Polypropylene Audio Capacitors Features
Top of the range pure aluminum foil capacitor
High Precise Capacitance ±5%
Very Low Dielectric absorption factor
Very Low Dissipation factor
Very Low ESR
Very Low Inductance

WEET WMG Axial Superior Aluminum Foil and Film Met. Polypropylene Audio Capacitors Specifications
Passive flammability:  GB10191-88 IEC384-16
Operating temperature:  -55℃～+85℃
Capacitance range:  0.01~0.47uF
Capacitance tolerance:  ±5%(J) 1KHz
Rated voltage:  630V DC
Withstand voltag:  1.6VR 5S
Dissipation factor:  ≤0.0002 1KHz
Insulate the electric resistance:  CR≤0.33μF, I.R≥15,000MΩ, CR>0.33μF, I.R≥5,000S
Leads Diameter:  0.8mm Tinned Copper Wire

WEE Technology Company Limited - WEE are Capacitors Specialist    

WEET Aluminum Foil and Film Metallized Polypropylene Capacitors Axial Audio Music Hifi Crossover Amplifiers Capacitors

WEET audio grade capacitors are great for all audio and general electrical applications. WEET WMG and WMH capacitors are made with the finest pure aluminum foil and polypropylene film, and are considered by many customers to be the best audio capacitor in the world!

Several advantages the aluminum foil and film audio capacitors design offers over metallized are a higher insulation resistance, lower ESR, better capacitance stability, high current carrying capabilities for pulse applications (high dV/dt capability) and a lower dissipation factor.

WMG and WMH capacitors are a luxury audiophile grade capacitor designed for quick transient response and modern high-end tweeters. 1 piece MOQ and competitive price are our advantage. By the way, bare price doesn’t mean we sell products of inferior quality, only because we are factory and we care about our customers profits.

WME - Premium Metallized Polypropylene Film Capacitors MKP– Axial

WMF - Precise Metallized Polypropylene Film Capacitors MKP– Axial

WMG - Superior Aluminum Foil and Film Metallized Polypropylene Capacitors Axial 

WMH - Luxury Aluminum Foil and Film Metallized Polypropylene Capacitors Axial

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WMH Luxury Pure Foil and Film Metallized Polypropylene Capacitors Axial Audio Music Hifi Capacitors

These capacitors are suitable for a wide range of applications in audio amplifiers, circuits for audio speakers, speaker crossovers, audio systems for car, record players, CD players, and musical instruments such as bass guitars. 

What is audio grade capacitor? These are capacitors specifically for high-end audio systems, and offer premium sound quality in audio circuits when compared to general purpose capacitors. These types of capacitors that are commonly used in audio circuits are aluminum electrolytic and film capacitors.

WMH Luxury Aluminum Foil and Film Metallized Polypropylene Capacitors Axial Specifications

Passive flammability: GB10191-88 IEC384-16
Operating temperature: -55℃～+85℃
Capacitance range: 1~10uF
Capacitance tolerance: ±3%(E) 1KHz
Rated voltage: 100V, 200V. DC
Withstand voltage: 1.6VR 5S
Dissipation factor: ≤0.0002 1KHz
Insulate the electric resistance: CR≤0.33μF, I.R≥15,000MΩ , CR>0.33μF, I.R≥5,000S
Leads Diameter: 1.0 Tinned Copper Wire