WEE Technology Company Limited - WEE are Capacitors Specialist    

WEET Aluminum Foil and Film Metallized Polypropylene Capacitors Axial Audio Music Hifi Crossover Amplifiers Capacitors

WEET audio grade capacitors are great for all audio and general electrical applications. WEET WMG and WMH capacitors are made with the finest pure aluminum foil and polypropylene film, and are considered by many customers to be the best audio capacitor in the world!

Several advantages the aluminum foil and film audio capacitors design offers over metallized are a higher insulation resistance, lower ESR, better capacitance stability, high current carrying capabilities for pulse applications (high dV/dt capability) and a lower dissipation factor.

WMG and WMH capacitors are a luxury audiophile grade capacitor designed for quick transient response and modern high-end tweeters. 1 piece MOQ and competitive price are our advantage. By the way, bare price doesn’t mean we sell products of inferior quality, only because we are factory and we care about our customers profits.

WME - Premium Metallized Polypropylene Film Capacitors MKP– Axial

WMF - Precise Metallized Polypropylene Film Capacitors MKP– Axial

WMG - Superior Aluminum Foil and Film Metallized Polypropylene Capacitors Axial 

WMH - Luxury Aluminum Foil and Film Metallized Polypropylene Capacitors Axial

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WMH Luxury Pure Foil and Film Metallized Polypropylene Capacitors Axial Audio Music Hifi Capacitors

These capacitors are suitable for a wide range of applications in audio amplifiers, circuits for audio speakers, speaker crossovers, audio systems for car, record players, CD players, and musical instruments such as bass guitars. 

What is audio grade capacitor? These are capacitors specifically for high-end audio systems, and offer premium sound quality in audio circuits when compared to general purpose capacitors. These types of capacitors that are commonly used in audio circuits are aluminum electrolytic and film capacitors.

WMH Luxury Aluminum Foil and Film Metallized Polypropylene Capacitors Axial Specifications

Passive flammability: GB10191-88 IEC384-16
Operating temperature: -55℃～+85℃
Capacitance range: 1~10uF
Capacitance tolerance: ±3%(E) 1KHz
Rated voltage: 100V, 200V. DC
Withstand voltage: 1.6VR 5S
Dissipation factor: ≤0.0002 1KHz
Insulate the electric resistance: CR≤0.33μF, I.R≥15,000MΩ , CR>0.33μF, I.R≥5,000S
Leads Diameter: 1.0 Tinned Copper Wire

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WMH Luxury Aluminum Foil and Film Metallized Polypropylene Capacitors Cross Reference Table: 

WEET MMH Cross to MusiCap Film and Foil Polypropylene Audio Capacitors 
WEET MMH Cross to Audiocap PPT Theta 10uF 200V Film/Foil Capacitor
WEET MMH Cross to Film & Foil Polypropylene Capacitors - Solen

The PPT Theta AudioCap is an excellent film and foil capacitor for all audio circuits and power supplies, Polypropylene and Foil Audio Capacitors, Audio-optimized Film Capacitors.

The WMH series is designed and optimized for high-end audio applications subject to AC and pulsing signals. It offers high frequency operation, high current and low ESR. As a result, the WMH series is able to handle high surge current without degrading. As part of a designated line of capacitors for high-end audio applications, audio engineers prefer the WMHseries for professional, commercial stage and studio use.

Its high-grade materials, design and manufacturing process also is suitable for DC applications. Proudly made in the U.S., the WMH series is created with specialized design, testing and manufacturing techniques proprietary to Electrocube.

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WMF Precise Audio Film Capacitors Test Report and Testimonials From Audiophiles and Audio DIY Hobbyist

"I have indeed installed the WEET WMF capacitors,  as replacements in two speaker crossovers. The difference was quite apparent right away, and I expect it to get better as the caps settle in. 

What I did notice is that sound in the midrange region became less forward, less flat and hard. The soundstage expanded in three directions, height, width and depth. The highs seem better defined but at the same time a papery, whispery quality, which I believe is in the nature of the tweeter of this speaker, became more audible on certain musical pieces.

More listening time is needed to be sure of my impressions. I do think, however, that these capacitors can be used successfully in speakers of very high quality, even better than the ones I tried.

The speakers I upgraded with the WEET WMF capacitors pair are a pair of NHT Model 1A. I am sure the WMF caps would be appropriate for other, more refined makes and models. My next project is to upgrade a pair of Dynaco A25, but unfortunately there is no WMF model with the correct 5uF value. I shall use Clarity Caps instead.

I have a little experience with different makes of equipment. I participate in the review panel of a hi-fi magazine ( UHF Magazine ), and learned to listen carefully to a good speaker. My present speakers are ATD Capriccio Continuo… Admonitors.

The open sound and non-agressive highs I noticed after installing the WMF caps, are typical of speakers much more expensive than the NHT Model 1A.

One welcome characteristic of the WMF caps was their relatively small size. They were not drop-in replacements for the tiny electrolytics in the original NHT crossover, but I found a convenient way to fit them in.

The upgraded NHT 1As are now back with their owner and the caps should have finished running in. I hope to get a listening session with them fairly soon, and I shall let you know any further impressions then."

 ---- From Toby Earp

WEE Technology Company Limited - WEE are Capacitors Specialist

We offer very low ESR, very low dissipation factor: ≤0.0005 1KHZ, the leads are tinned pure coper wire.
WEET WMF is very excellent replacements of Mundorf, Auricap, Solen, ERSE, etc…but important is prices are much more attractive.
Compared with WME, WMF has much lower inductance and much lower Dissipation Factor, very goods sound effect.

http://www.humblehomemadehifi.com/Cap.html

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WMF 250VDC 400VDC Precise Audio Film Capacitors Size Capacitance Table Order Guidance, How to order and choose WEET audio capacitors?

WMF - Precise Metallized Polypropylene Film Capacitors – Axial Features:

Quick transient design
High Precise Capacitance ±3%, ±5%
Very Low Dielectric absorption factor
Very Low Dissipation factor
Very Low ESR
Very Low Inductance
Excellent handling of high current audio pulses

WEE Technology Company Limited - WEE are Capacitors Specialist

This high quality WEET Precise Audio film capacitor provide perfect sound quality. WEET Capacitor is capable of selling low MOQ and competitive price, specally when compare with overseas brands, like Auricap,Clarity Cap, jb Capacitors, Mundorf MCap and so on. WEET capacitor will win.

WMF - Precise Metallized Polypropylene Audio Film Capacitors – Axial Specifications

WEE Technology Company Limited - WEE are Capacitors Specialist        

The exceptional WEET line of metallized polypropylene capacitors features a high purity, polypropylene film dielectric.
They exhibit outstanding high frequency characteristics, low dielectric absorption factor, high current capacity, and unrivalled handling of fast high current pulses. High Precise Capacitance ±3%, ±5%
Designed specifically for use in loudspeaker crossover networks.

Specifications: • Rated: 250 VDC • Tolerance: 5% • Value: 2.2 uF • Max. Voltage: 250V