WEE Technology Company Limited - WEE are Capacitors Specialist

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WCF RF Radio Frequency High Q Multilayer Chip Ceramic MLCC Capacitor Size Table and Meterial Guideline

WEE Technology Company Limited - WEE are Capacitors Specialist

Q is the quality factor, D is the loss angle factor, also known as Tan & loss angle. Q is equal to the reciprocal of D, so they are inversely proportional. They are the main parameters to measure the capacitor. The higher the Q value, the smaller the loss and the higher the efficiency.

WEET WCF Series GCQ chip multilayer ceramic capacitor with high Q value and low ESR can provide high frequency and low power consumption for automotive applications. WEET WCF Series GCQ uses ceramic dielectric materials (very low loss at high frequency) and copper internal electrodes.GCQ adopts rated voltage of 50VDC and capacitance of 0.10pF to 47pF. 

CAP. RANGE:0.1pF - 6800pF
VOLT. RANGE (DC): 250VDC to 7200VDC
TEMP. RANGE (°C):COG
SIZE: 0603, 0805, 0505, 1111, 2525, 3838

Features of WEET WCF Series RF high-Q multilayer chip ceramic capacitor: Series size, suitable for surface mount components of hybrid integrated circuit or printed circuit; high Q value, low ESR, high reliability; low loss, high capacitance stability, working frequency up to 3GHz; suitable for high frequency circuit, VHF microwave section, RF and amplifier circuit in various equipment;

WEE Technology Company Limited - WEE are Capacitors Specialist

The WEET WCA high-voltage ceramic chip capacitor is a round chip capacitor with ceramic material as the medium.The shell is ceramic for insulation.
One of the main characteristics of high-voltage ceramic capacitor is that it has high withstand voltage, and the voltage is generally greater than 1KV
The high-voltage ceramic capacitor has the voltage of 2KV, 3KV and 4KV, Often used in high-pressure situations, Up to 30KV
In the porcelain capacitor, the voltage below DC50V is generally called low voltage, DC100v ~ 500V is medium high voltage, 
DC1000V ~ 6000V and is high voltage, and the voltage above DC6000V is ultra high voltage
Safety Y capacitor is also a high-voltage ceramic chip capacitor

The WEET WCA ceramic chip capacitor can be divided into class I porcelain, class II porcelain and class III porcelain. Class I porcelain, NPO, has good temperature, frequency and voltage characteristics. Because the dielectric constant is not high, the capacity is not large; class II porcelain, X7R comes next, has good temperature and voltage characteristics; class III porcelain has high dielectric constant, so the capacity can be large, but the temperature and voltage characteristics are not good, High voltage ceramic capacitor is generally small in size.

In addition, after breakdown, the ceramic capacitors tend to be in a short circuit state(this is its weakness) and after the film capacitor fails, it is generally in an open circuit state.The capacitance of high-voltage ceramic depends on the occasion of use, and the typical function can eliminate high-frequency interference.High voltage ceramic capacitors used in high power and high voltage fields are required to be small, high voltage withstand and good frequency characteristics.In recent years, with the progress of materials, electrodes and manufacturing technology, the development of high-voltage ceramic chip capacitor has made great progress and has been widely used. High voltage ceramic capacitor has become one of the indispensable components of high power and high voltage electronic products.

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WCE High voltage chip MLCC capacitors and large capacity chip capacitors are commonly used for lamps, which can replace traditional plug-in porcelain chips and power supply dedicated for resistance, capacitance and voltage reduction.)
The 1206 series of high-voltage chip capacitor products are divided into high-frequency ceramic NPO (COG) and low-frequency ceramic X7R. 
The price of NPO medium is relatively high X7R media is more expensive, but at the same time, its quality will be relatively high.1206 high voltage chip capacitor is widely used in controller, new energy vehicle electronics, industrial equipment, power products and other fields, its basic

The working principle is charging and discharging, of course, rectification, oscillation and other functions.

Below is the WEET WCE High voltage chip MLCC capacitors and WCD Standard Chip Capacitors Cross Reference to famous MLCC brands.

WEE Technology Company Limited - WEE are Capacitors Specialist

Generally speaking, the WEET Chip capacitor refers to MLCC, that is, multilayer ceramic capacitors, also known as chip capacitor or SMD capacitor. Conventional chip capacitors are divided into COG (NPO), X7R, Y5V according to materials. According to British standard, there are 12 types of pin package: 0201, 0402, 0603, 0805, 1206, 1210, 1812, 1825, 2010, 2225, 3012, 3035.

0201, 0402, 0603, 0805 and 1206 are WEET chip capacitors with common package sizes, and the capacity range is generally 0.5pf ~ 1uF.

1210, 1812, 1825, 2010, 2225, 3012, 3035 are large-scale WEET chip capacitors, with a capacity range of 1uF ~ 100uF.

WEE Technology Multilayer ceramic capacitor (MLCC) is composed of parallel ceramic materials and electrode materials.

WEET MLCC products have high dimensional accuracy, which is convenient for high-efficiency assembly of automatic SMT machine; the end electrode is three-layer electrode, which is suitable for wave soldering and reflow soldering; the dielectric body and the surface are the same material, with small environmental impact, high insulation resistance and high reliability; it contains various temperature characteristic media from cog to Y5V, which is suitable for communication, computer, household appliances, instruments and other common electronic equipment.

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET would like to share WCD and WCE Series Characteristics of chip smd MLCC multilayer ceramic capacitors:

1. The equivalent series resistance (ESR) is small and the impedance (z) is low.
2. The rated ripple current is large.
3. The varieties and specifications are complete.
4. Small size (withstand voltage 10V).
5. No polarity.

WEET WCD and WCE Series Advantages of chip surface mount MLCC multilayer ceramic capacitors

1. Due to the use of multi-layer dielectric stack structure, the inductance is very low at high frequency, with very low equivalent series resistance, so it can be used in high frequency and very high frequency circuit filtering without opponent.
2. No polarity, can be used in very high ripple circuits or AC circuits.
3. Using in low impedance circuits does not require a large derating.
4. No combustion and explosion during breakdown, high safety.Structure and working principle of chip multilayer ceramic capacitor: MLCC capacitor is simple in structure and consists of ceramic medium, inner electrode metal layer and outer electrode three layers.

The capacity formula of MLCC can be expressed as follows:

C: The capacitance is in F (farad), while the capacitance of MLCC is mainly in PF, NF, and F.
ε: Dielectric constant of insulation between electrodes, in farad / m.
K: Dielectric constant (depending on ceramic type)
A: Conductive area (different product size and printing area)
D: Thickness of dielectric layer (thickness of thin strip)
n: Layers (stack layers)

As we all know, a capacitor is a container that can store electricity. Its basic principle is to use two pieces of metal that are parallel to each other but not in contact with each other. In the middle, air or other materials are used as insulation. One piece of the two pieces of metal is connected to the positive pole of the battery, and the other is connected to the negative pole. The metal piece can store electricity. Compared with the common electrolytic capacitor, MLCC (multilayer ceramic capacitor) can be made into thin sheet (n stack layers are many), so MLCC can greatly improve the capacity of its capacitor under the same volume.

WEE Technology Company Limited - WEE are Capacitors Specialist

WEE Technology Company Limited - WEE are Capacitors Specialist
The application of MLCC Mono capacitor is mainly in LCD watch, electronic camera, micro instrument, medical instrument and electronic tuner, while the application of ceramic capacitor is mainly in high frequency oscillation circuit, bypass and decoupling.

Axial Lead MLCC Multilayer Ceramic Capacitors WCC Key Characteristics:

Capacitance:1pF - 1µF
Voltage:25VDC 50VDC 100VDC
Operation Temperature: NPO（-55°C~125°C）, X7R（-55°C~125°C）, Y5V（-25°C~85°C）

Axial Lead MLCC Multilayer Ceramic Capacitors Cross Reference: WCC Series 
NIC Series: NCMA
AVX(KYOCERA): SA Series
Kemet:C410~C440
Mallory :P
Vishay:A (Mono-Axial)

Radial Lead MLCC Multilayer Ceramic Capacitors Cross Reference: WCB Series 
NIC Series :NCM
AVX(KYOCERA): SR Series Skycap 
Kemet :C315~C350
Mallory :M 
Panasonic :ECU-S
Phillips : K, CN CW,CZ
Vishay/BC Components :K (Mono-Kap)
Murata : RPE 
Nippon chemi-con : THD serie
Syfer: 8111M, 8111N,8121M, 8121N,8131M, 8141M,8151M, 8161M,8171M

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET WCB Series Radial MLCC Capacitors(Multilayer Ceramic Capacitors) MONO Caps Cross Reference and How to ready MLCC Code Meaning

The capacity unit of capacitance is: (F), (uF), (pF). Generally we don't use it as a unit, because it's too big. 
The conversion relationship between units is: 1F = 1000000uF, 1uF = 1000000pF. In use, unit: NF is often seen. 1uF=1000nF 1nF=1000pF

If the capacitance is directly marked as 0.47, it means the capacity is 47uF and the capacitance withstand voltage is 25V. 
The mathematical counting method is adopted: the standard value is 104, and the capacity is 10x100000pF = 0.1uF. If the standard value is 473, it is 47x1000pF = 0.047uF. (the following 4 and 3 are the power of 10). Another example: 332 = 33x100pF= 3300pF.
Therefore, we can identify the capacitance of Dushi capacitor 104 according to the identification method. 
The identity 104 represents a capacity size of 0.1uF.

F：法、mF：毫法、uF：微法、nF：纳法、pF：皮法

1法拉(F) = 1×10^6微法(μF)=1000000微法(μF)

1微法(μF)=1X10^3纳法(nF)

1微法(μF)= 1×10^6皮法(pF)=1000000皮法(pF)法拉是一种国际单位制导出单位。

1F=1 C/V=1 sAmkg

法拉（farad，符号为F）是国际单位制（SI）中电容的标准单位。简称“法”，单位符号是F。基于国际单位系统，1法拉等于秒的四次方安培的平方每千克每平方米。