WEET Low Capacitance Low DF Audio Capacitors From 0.1uF to 1F 400V of the WME and WMF Series

WEE Technology Company Limited - WEE are Capacitors Specialist

Do you know what the differences between WEET WME and WMF series are and what they are in common?

WME - Premium Music Film Capacitors:

https://www.musicaps.com/product/WEET-WME-Premium-Music-Capacitors-Crossover-HIFI-Audio-Application-Polypropylene-Film-Capacitor.html

WMF Precise Audio Film Capacitors:

https://www.musicaps.com/product/WEET-WMF-Precise-Audio-Film-Capacitors-Audiophiler-MKP-Kondensotor-Cross-to-Solen-and-loudspeakers-Basic-Car-Audio.html

Well, the size capacitance and voltage are the same for these two series.

WME is filled with white epoxy and white plastic sleeve with blue oil marking, WMF is filled with red epoxy and red plastic sleeve with black oil marking, the marking description is different too.

Most important difference is that MWF has lower DF than WME, even though WME already with low DF. For each item there is a specific DF value, please refer to our datasheet for details.

MKP Polypropylene CBB19 0.1uF ±5% 400V OD*L:6.5*18mm Axial RoHS

MKP Polypropylene CBB19 0.22uF ±5% 400V OD*L:8.5*18mm Axial RoHS

MKP Polypropylene CBB19 0.33uF ±5% 400V OD*L:10*18mm Axial RoHS

MKP Polypropylene CBB19 0.47uF ±5% 400V OD*L:9.5*24mm Axial RoHS

MKP Polypropylene CBB19 0.56uF ±5% 400V OD*L:10.5*24mm Axial RoHS

MKP Polypropylene CBB19 0.68uF ±5% 400V OD*L:11.5*24mm Axial RoHS 

MKP Polypropylene CBB19 0.82uF ±5% 400V OD*L:12.5*24mm Axial RoHS

MKP Polypropylene CBB19 1.0uF ±5% 400V OD*L:13.5*24mm Axial RoHS

WEET WMA Axial Metallized Polyester MKT Film Capacitor CYCLOIDAL Shape 1.8uF +/-10% 250VDC

WEE Technology Company Limited - WEE are Capacitors Specialist

Recently, WEET successfully helped out a United Kingdom customer with their new project. As told by the customer that their each PCB board needs four pieces of 1.8uF +/-10% 250VDC MKT yellow film capacitor, but due to the original design and space limitation of the PCB board, there is very tight room to put that four pieces of MKT capacitors, and they have very strict requirement for the dimension, especially the diameter, not bigger than 9mm. 

Before they contacted with us, they also consulted with other suppliers in China, but all in vain. Finally, WEET engineers studies their PCB drawing and outline, we made our 20 pieces samples to them in a week. After the tested the samples, they all excited to know that WEET WMA series is perfect for them, not only for capacitors size, but also for performance. Without further hesitation, they placed mass production order to us. 

Here we would like to thank the customers for their support and confidence in WEET capacitors, also we are pleased with WEET engineers. Let us work together to find the best solution to your requirements, cheers! 

https://www.musicaps.com/Uploads/PDF/WEET-WMA-MKT-Yellow-Color-CL19-Axial-Metallized-Polyester-Film-Capacitor.pdf

WEET Build Long Term Business Partnership with BEC Distribution Ltd. For Passive Components

WEE Technology Company Limited - WEE are Capacitors Specialist

What a great news to share with all of the customers that BEC become WEET authorized distributor for passive components in United Kingdom. Please kindly refer to below link that you will find all strong the products from WEE Technology. Welcome to consult with BEC for more product details.

https://www.bec.co.uk/product-category/weet/

WEE Technology Company Limited is specialized in manufacturing all kinds of Aluminum Electrolytic Capacitors, including SMD Surface mount chip Aluminum Electrolytic Capacitors, Snap-in Type Aluminum Electrolytic Capacitors, Screw Type Aluminum Electrolytic Capacitors, Lug Type Aluminum Electrolytic Capacitors and Radial Aluminum Electrolytic Capacitors.

WEET Ceramic Capacitors, includingX1 / CD Y1 400VAC and CE Y2 300AC Safety Standard Recognized Capacitors and 1KV, 2KV, 3KV,4KV, 5KV, 6KV, 8KV, 10KV, 15KV DC High Voltage Ceramic Radial Type Disc Capacitors, Multilayer (MONO/MLCC) Axial, Radial and Surface Mount SMD Ceramic Capacitors.

WEET Plastic Film Capacitors, including Metallized Polyester and Polypropylene Film Capacitors and X2 Capacitors. WEET audio capacitors enjoy good reputation all over the world with more than 20 years history. WEET adopt the key techniques from Taiwan factories and the main material for all imported from Japan and European counties.



WEET WMW Pure Copper Foil Capacitor Cross to Audyn True Copper Cap in Great Promotion

WEE Technology Company Limited - WEE are Capacitors Specialist

Firstly, we share some customer’s feedback about WEET WMW Pure Copper Foil Capacitor.

All in all, excellent product, well made and very happy thus far with the sound quality.The WEET Pure Copper Cap is very suitable for audio individual instruments. Very nice and coherent sounding with rich natural harmonics. The WEET Pure Copper Capacitor has a perfect balance between warmth and detail. The amount of detail and spatial information lets you hear the acoustics of the recording venue well.

You may be familiar with above testing review of Pure Copper Capacitor, which is true, because Audyn True Copper Cap and Jantzen Audio Amber Z-Cap are the same sound quality with WEET WMW Pure Copper Foil Capacitor. If you doubt about it, you should have a try and hear by yourself.

But considering of these European brands price, there is very small amount of customer who will be buyers. However, in the terms of price, WEET absolutely win. In order to compete with them and earn more market shares, WEET decided to do non-profit project for a period. From June to August, all the customers will enjoy 10% discount of the original price for WMW Pure Copper Foil Capacitor. First come, first served.


WEET WMH Pure Aluminum Foil Capacitor Cross Reference to Jantzen Audio Alumen Z Cap Cost Down

WEE Technology Company Limited - WEE are Capacitors Specialist

WEET is one of the oldest capacitors factory in China mainland and with a part of staffs in Taiwan development center, for pure aluminum foil capacitors, we manufactured the core part in our Taiwan office, and then assembly in Dongguan factory. 

Now, we have introduced new machines for aluminum film and foil capacitors in our Dongguan factory and invited our chief engineer from Taiwan to our workshop to guide and train domestic operators. After nearly 6 months training and production line running, we are glad to share the news that we have successfully finished all the aluminum film and foil capacitor manufacturing process. 

With this great achievement, we have saved a large amount of labor cost and transportation fee in Taiwan office, so it is a right now to lower down capacitors cost and provide more favorable price to our customers, please do not miss this opportunity. If you are in need of high end audio capacitors, contact with WEET as early as you can. We are ready to serve you at any time.

WEET-4.7uF-6.8uF-3.9uF-100V-Copper-and-Aluminum-Foil-Audio-or-Crossover-Capacitors-Condensadores-For-Speaker.jpg


WEET Provide One Piece MOQ and OEM Service for Audio Crossover Bypass Music Capacitors

Do you want to see your own designed marking and trademark on your capacitors?

Do you have interest to change a pair of music capacitors in your speaker or audio application?

Do you think it is possible to order one piece of audio capacitor from real Chinese factory?

Do you doubt about the sounding quality as the price is much lower than the big brands?

Please kindly and patiently see below answers to above questions:

WEET is quite flexible in markings, with WEET standard marking, the MOQ can begin with one piece, but we also can do your markings with request MOQ for different series. For Foil and Film capacitors, we start with 10 pieces with your logo. As we know most of the capacitors from European brands are very expensive, actually some of them are OEM in China factories. To be frank, we have done OEM service for many years, so we have confidence in sounding quality. 

Finally, we are the end factory and well control of the raw material cost, so price will be very affordable to most of the end users. Welcome to try WEET audio capacitors.

WEET-Warm-Sounding-Capacitor-Audiophile-listening-Test-Suppliers-Distributors-in-Hi-End-Audio-Applications-China.jpg


WEET Safety Capacitors Class X and Class Y Capacitors line to ground capacitors VDE UL Certified Cer

WEE Technology Company Limited - WEE are Capacitors Specialist


WSY X1 Y1 CD 400VAC and Y2 AC CE 300VAC Safety Standard Recognized Capacitors

Datasheet: https://www.weetcapacitor.com/Datasheet/WEET-WSY-X1-Y1-CD-400VAC-and-Y2-AC-CE-300VAC-Safety-Standard-Recognized-Capacitors.pdf 


Safety Standard Recognized Capacitor - Y

AC Line Rated Ceramic Disc Capacitors

Class X1, 440VAC, Class Y1, 400VAC , 

Class X1, 400VAC, Class Y2, 300VAC


Ideal for across the line applications

Compact size

Cost effective product

Safety standards recognized


Marking: CD222M

2200pF 400VAC +/-20% P:10mm Y5V D:8.5mm Ammo

PN: WSYA4M222DF085000A


Marking: CD332M

3300pF 400VAC +/-20% P:10mm Y5V D:10.5mm Ammo

PN: WSYA4M332DF105000A


Marking: CD472M

4700pF 400VAC +/-20% P:10mm Y5V D:12mm Ammo

PN: WSYA4M472DF120000A



Marking: CE472M

4700pF 300VAC +/-20% P:7.5mm Y5V D:9.5mm Ammo

PN: WSYA2M472CF095000A


Marking: CE332M

3300pF 300VAC +/-20% P:7.5mm Y5V D:6.5mm Ammo

PN: WSYA2M332CF065000A


Marking: CE103M

0.01uF 300VAC +/-20% P:10mm Y5V D:13.5mm Ammo

PN: WSYA2M103DF135000A

WEET WSY X1 Y1 CD 400VAC Y2 AC CE 300VAC Safety Standard Recognized Capacitors Across Songtian STE

WEE Technology Company Limited - WEE are Capacitors Specialist


WSY X1 Y1 CD 400VAC and Y2 AC CE 300VAC Safety Standard Recognized Capacitors Across to Songtian STE China on Sale, Radial Disc Ceramic Capacitors, AC Line Rated Ceramic Disc Capacitors


Datasheet: https://www.weetcapacitor.com/Datasheet/WEET-WSY-X1-Y1-CD-400VAC-and-Y2-AC-CE-300VAC-Safety-Standard-Recognized-Capacitors.pdf 


CE Y2 300VAC:


Marking: CE102M

300VAC +/-20% 1000pF P:7.5mm Y5U D:7.5mm Ammo

PN: WSYA2M102CE075000A


Marking: CE332M

300VAC +/-20% 3300pF P:7.5mm Y5V D:6.5mm Ammo

PN: WSYA2M332CF065000A


Marking: CE472M

300VAC +/-20% 4700pF P:7.5mm Y5V D:9.5mm Ammo

PN: WSYA2M472CF095000A


Marking: CE103M

300VAC +/-20% 0.01uF P:10mm Y5V D:13.5mm Ammo

PN: WSYA2M103DF135000A


Typical Applications : Line disturbances suppression, Motors and motor controls, Relays, Switching power supplies, Inverters, Line-to-line (Class X) filtering, Line-to-ground (Class Y) filtering, Antenna coupling, Primary and secondary coupling, Network and security protection, audio visual product,, Home Appliance, new energy, Industry automation, LED...


WEET Y5P Y5U Y5V Y1 102M EMI RFI Suppression Y1 Ceramic Disc Safety Capacitor 470pF 4000V Class Y 10

WEE Technology Company Limited - WEE are Capacitors Specialist


WSY X1 Y1 CD 400VAC and Y2 AC CE 300VAC Safety Standard Recognized Capacitors, Radial Disc Ceramic Capacitors, AC Line Rated Ceramic Disc Capacitors


Datasheet: https://www.weetcapacitor.com/Datasheet/WEET-WSY-X1-Y1-CD-400VAC-and-Y2-AC-CE-300VAC-Safety-Standard-Recognized-Capacitors.pdf 


CD X1 / Y1 400VAC:


Marking: CD102M

1000pF 400VAC +/-20% P:10mm Y5U D:9.5mm Ammo

PN: WSYA4M102DE095000A


Marking: CD222M

2200pF 400VAC +/-20% P:10mm Y5V D:8.5mm Ammo

PN: WSYA4M222DF085000A


Marking: CD332M

3300pF 400VAC +/-20% P:10mm Y5V D:10.5mm Ammo

PN: WSYA4M332DF105000A


Marking: CD472M

4700pF 400VAC +/-20% P:10mm Y5V D:12mm Ammo

PN: WSYA4M472DF120000A


X1 and Y1 safety capacitors are used in industrial settings. Y Capacitors: Also known as "line to ground capacitors" (line bypass.) Y capacitors are used in applications where failure of the capacitor could lead to the danger of electrical shock to

the user, if the ground connection is lost.


Classic Applications: Home Appliance, new energy, Industry automation, audio visual product, Network and security protection, Line disturbances suppression, Motors and motor controls, Relays, Switching power supplies, Inverters, Line-to-line (Class X) filtering, Line-to-ground (Class Y) filtering, Antenna coupling, Primary and secondary coupling...


WEET SMD Aluminum Electrolytic Capacitors 105C 2000Hours Standard CS XT Marking Miniature Sizes

WEE Technology Company Limited - WEE are Capacitors Specialist


WXT - 2000H 105°C Standard and Wide Temperature SMD E-cap Aluminum Electrolytic Capacitors, Standard CS XT Marking Miniature Sizes and Packing Code Chip Type Ecaps


Datasheet: https://www.weetcapacitor.com/Datasheet/WEET-WXT-SMD-Aluminum-Electrolytic-Capacitors-105C-2000Hours-Wide-Temperature.pdf 


10uF 100V +/-20% 5*5.4mm RC: 60mA Tape/Reel

PN: WXT2A100M050054TR

10uF 100V +/-20% 6.3*5.4mm RC: 70mA Tape/Reel

PN: WXT2A100M063054TR


100uF 63V +/-20% 10*10.5mm RC: 196mA Tape/Reel

PN: WXT1J101M100105TR


220uF 50V +/-20% 10*10.5mm RC: 220mA Tape/Reel

PN: WXT1H221M100105TR


470uF 35V +/-20% 10*10.5mm RC: 310mA Tape/Reel

PN: WXT1V471M100105TR


680uF 25V +/-20% 10*10.5mm RC: 245mA Tape/Reel

PN: WXT1E681M100105TR


1000uF 16V +/-20% 10*10.5mm RC: 340mA Tape/Reel

PN: WXT1C102M100105TR


1500uF 10V +/-20% 10*10.5mm RC: 335mA Tape/Reel

PN: WXT1A152M100105TR


2200uF 4V +/-20% 10*10.5mm RC: 340mA Tape/Reel


More values are available on request, we are capable of doing custom service for you. 


Whether it is a plug-in or a patch-type installation process, the capacitor itself is upright on the PCB. The fundamental difference is that the capacitors installed in the SMT patch process have a black rubber base. The main advantage of SMT lies in production. It has a high degree of automation and high precision, and it is not as easily damaged as a plug-in type during transportation.


Contact WEET to provide you with the best quality SMD aluminum electrolytic capacitors if you are looking for SMD aluminum electrolytic capacitors.